Tuesday, March 8, 2011
Volkswagen New Beetle Convertible 1998-2008 tooth belt removal and installation
Toothed belt special tools, testers, and support for secondary items require A bridge 10-222 engines (10-222 A Guide/21), 10-222 A 8 torque wrench adapters V.A.G 1331 torque wrench V.A.G 1332 pin wrench T10020 change engine support legs 10-222 A/. 10-222 A Guide/21 engines support A bridge 10-222 engines/transport is required to support a subassembly. A new bore 10 222/8 adapter necessary for protecting A 10 222. Guide/21 Dimension m m. m-222 m diameter 10 hole-A Guide to 12.5/21 arrows-drill.
Remove
Just remove the exterior noise insulated body-recovery group 50. remove engine cover The ribs are removed, ribbed belt belts. Ribbed belt tension elements removed. (Coolant hose connected) coolant expansion tank. Remove the belt guard at the top of the teeth. Turning the crank shaft to shaft, cylinder 1 TDC equipment for marking. Shaft equipment marking the teeth on the belt guard-should match the arrow-arrow. Engine mount A foot bridge supported A 10-222 222, 10/8 illustrations.
-1-Subframe: remove: removes the bolt-arrow-. -Release the arrow A-bolt. Note: the engine, engine support legs, if it is supported by 10 222 a subframe that could be removed only! If you remove beurakeseun engine, first to the loose subframe. Vibration damper/belt pulley. Remove the engine cylinder block from the carrier. Note: the front engine mounting bracket bolts you must turn off the engine and engine support legs a bit. Center parts and teeth to remove the lower part of the belt guard.
