Friday, July 8, 2011
Valuxhla D/i/2 i Opel 2.0 D diesel engine set/unlock Tools Kit VS131
VS131 settings/unlock Tools Kit for the ' lock ' position, the crankshaft of the exact timing and locking pin injection pump shaft locking pins and shafts settings tool. Also, Kit and engine timing procedures during the pump timing/c a m required to modify the location of the Gamla timing adjustment Assembly. The correct position of the ' timing ' the cylinder head removal engine, shaft/valve train needs adjustment or major engine repair service operation has been carried out will need to be reset every time.
Important: 1 the position of the cylinder and the timing in the TDC the correct PIN and crankshaft pins, dosing pump shaft configuration tool can be installed both on the engine.
VS131/01 shaft configuration tool
VS131/01 ' settings ' in the shaft, time and location on the shaft (Figure 1), locate the slot on the back of the machined horizontal. The best tool to find uncover holes in shafts and pins correctly must be involved in.
VS131/02 the crankshaft pin lock
VS131/02 If you want to place the TDC in the crankshaft. It is in the cylinder block (Figure 3) is inserted through the crankshaft pulse pickups, and engaged in the crankshaft to provide a ' slot '.
VS131/03 injection pump lock-pin VS131/03 simple dosing pump and timing mark on Gamla dosing pump flange and bore (Figure 4) in the pump to maintain a recess.
Important: enter the smooth bores easily slide the locking pins must be outside. 4.6 see also carried the engine timing check-all three tools, you must position yourself correctly, found in. Adjust the timing. Important: If you disable or remove these timing tool crank pulley and toothed shaft counterhold is not available. They preserve the location of the timing engine.
