Tuesday, October 30, 2012
Sebo Electric Power brush a-H user's Manual
Sebo Electric Power brush a-H On top of the power brush is a red/green indicator light. LF the green light is on and rotating the neck is upright and then brush power is ready for operation. By lowering the rotary brush neck is enabled. Make sure that the vacuum cleaner is set to maximum effect. Green and red lights on together, set up security due to either overload or blocking.
Brush adjustment On top of the power brush is a rotary control to adjust brush action. Brush action can be set from SOFT through to hard disk as appropriate.
Service – (unplug the vacuum cleaner outlet fire mains) brush, cleaned regularly fibers and hairs. After a blocking or when brush dragged into something, clear brush and take all the debris out of the brush area. Check the rotating neck regularly for blockages Turn the brush roller clockwise and edge-cleaning brush Fredrik when you remove them from the appliance. Fit the new brushes onto the drive shaft by turning them until they click into place. Also to prepare the end turn caps them until it snaps into place. Make sure not to press the bristles brushes under the captions.
Attention – security regulations for the application:
the machine has a rotary brushalways make sure that the brush does not drag the carpet edges, edge, cables, etc.Berber, woven and other difficult floor coverings or floors with sensitive surfaces Please clean with the nozzle combination of your vacuum cleaneron uneven floors contact with the lower plate is possible. Use combination nozzle, if damage can occurlift the machine over obstacles
Download Sebo Electric Power brush a-H user's Manual
