Tuesday, October 30, 2012
Sebo X 4 extra upright vacuum cleaner user's Manual
Stationary use warning. When the machine has its handle in upright position-locked, it is designed to pull back the brush roller from the floor by raising the height of the power header. "Check BRUSH" light blinks slowly to alert the user if the power head when its highest brush height, but is still engaged in the carpet. This can occur at extremely high-nap carpet, such as loose pile, shag, or on blankets with exceedingly thick padding underneath. However, it is typically caused by the user pulls up on the machine at the same time by using the attachment hose or Active magic wand. This feature was designed to be a reminder to the user to "take care" while the machine is stationary. An operating machine should not be left stationary on the floor of the inappropriate periods.
Change the filter Micro The micro filter (30) needs change when it becomes very dirty or clogged with dust, or when about 20 dust bags have been used. If you want to change the filter microenterprises, pull the cover release Pat (# 5 on page 5) forward and lift cover from dust bag housing. Then slide the filter out the bottom. If you want to replace, lift the safety lever (31), and slide the new filter into using numbers as guides.
Connect an attachment device, if desired, to the end of the flexible hose. You can also release the hose, while attachment tube disconnected from the machine by pressing the release button at the base of the handle (11). The tubing should never be used with the brush still in contact with the floor.
Download the Sebo X 4 extra upright vacuum cleaner user's Manual
