Tuesday, October 30, 2012
Sebo X 1.1 upright vacuum cleaner user's Manual
Sebo X 1.1 upright vacuum cleaner Brush roller obstruction – Auto Shut-off. If the brush roller is blocked, will turn off the machine and the Red "check BRUSH" light on top of the head of power will blink. The user should turn off switch, Unplug the machine and immediately remove the obstruction. If the user reboots the machine without removing the obstruction, the machine will switch off and "Check BRUSH" light will blink.
Position the power header (9) on the floor with rotating neck (20) and (21) support the handle upright. Hold the dust bag housing (6) vertical, and place it over the neck and rotating support handle. Push firmly and evenly down the House release the button (8) Snaps outward to its "locked" position.
Start the machine Before powering up your vacuum cleaner, make sure that the vacuum handle is in its locked upright position and that you have a firm hold on the grip handle to keep the machine from moving forward. Turn off the quick release cable hook (15) for the post up by moving it to the left or right and release the cable.Slip the cable upper cord hook (26).Connect and press the switch (2) to the '' in '' position.
Change the dust bag Pull cover release the flap forward (# 5 on page 5) and buoyancy bag cover (7) from the dust to change dust bag, housing. Cover release flaps must remain in forward "drawn-out" able to change dust bag and lock them in place.
Terminal clamps on both sides of the dust bag sealing plate, slide the plate (28) of the holder (29) and push the cap seal in posen. Slide the seal plate (28) of a new bag for the holder and push it down. Reinsert the cover in dust bag housing, push it forward and then lock it into place by pushing down cover release flap. You may find it convenient to save Cap bag inside the vacuum bag housing below the dust bag.
Download the Sebo X 1.1 upright vacuum cleaner user's Manual
