Wednesday, July 25, 2012
AVANTI WD30EC User Manual
Plug the appliance into an exclusive ground properly installed firewall network. Under no circumstances does not Cut or remove third (ground) prong CD has to offer from the power cord. Questions about power and/or grounding should be directed to certified electrician or authorized products of AVANTI a service center.The water cooler is purchased-cleaned by the factory, but the tank and water lines must flush the column as follows with fresh water before use:
Keep the unit unplugged. Tank for water be filled with running water, full of capacity (about 20 ounces). Wait for 5 minutes, until the water. continue to drain the water from the two faucets, until no more water remains. then drain any water remaining in the tanks by opening the water leave the caps located on the bottom, while fully placed. Continue to close the lids of brains. Also, make sure that both faucets are closed. Insert bottle water of water intake, allow water to stand for about one minute. Open water faucets to insure water flows from both faucets package. plug into an electrical outlet. get manual here
