Wednesday, July 25, 2012
Euro-Pro 7500XH Sewing Machine User’s Manual
To test the bobbin thread tension, remove the bobbin case and bobbin from the machine and hold the bobbin case suspended by the thread. Shake it once or twice. If the suspended by the thread. Shake it once or twice. If the tension is correct, the thread will unwind by about an inch or two. If the tension is too tight, it will not unwind. If the tension is too loose, the thread will unwind for more than two inches.
Reverse sewing is used for locking the end of seams and where reinforcement is needed. At the end of seam, press down the reserve sewing lever and touch the foot control lightly. Sew a few reverse stitches. Release lever and the machine will sew forwards again.Remove the zigzag foot and attach the buttonhole foot. Adjust the stitch length dial between “0.5?-”1?. The density of the stitch depends on thickness of the fabric. get manual here
