Wednesday, July 25, 2012
AVANTI WDT51 User Manual
Check whether the following parts are included: instruction manualAccessories line fromBefore connecting the appliance to the power source, let it be placed upright approximately 2 hours. This will reduce the possibility of a failure in the cooling system of treatment during transport. water dispenser with fresh water before use, as follows:
keep the unit unpluggedFill water tank with water tab fully for capacity (almost 3/4 gallon). wait for 5 minutes unit water appliances.
Press stop valve for hot water, until the water, then Turn package. into an electrical outlet. All three indicator lights at the front will light up the most forward. we are ready to complete the first cycle to do this, wait for the light to be the first hot water (approximately 10 minutes), then wait for a light cold water to (yet 5 minutes approximately).
Cup dispenser (optional)
Cup dispenser can be installed by using the mounting holes (covered with plastic caps) located in the upper part of the right side panel cooler. Cup dispenser is equipped with a mounting screw and among can be ordered by completing the enclosed order of with your instructions. get manual here
