Wednesday, July 25, 2012
AVANTI WD31 User Manual
Use a clean cloth to wipe the neck of the bottle. Remove CAP, if any. Insert bottle water receives above the tank opening so it finds on it correctly. Wipe all water, which may be poured on top of the aerosol dispenser content.Turn the key, marked "cold" on the green indicator (cold) will be inaugurated and begin the process. When water reaches the appropriate temperature goes green (cold) indicator automatically.Turn the key, marked "hot" n. red indicator for (ACTIVE) will be lit on and unit will begin to heat the water. When water reaches the appropriate temperature goes red light (ACTIVE) automatically. When the temperature goes up to approximately 86 ° C (187 ° F), the red indicator will glow again and another.
Check to make sure the COLD switch on the back is on too much water is fixed within a short period of time. If more than two 8 oz glasses., have been defined in the trim of 25 minutes, you will need to wait about an hour to reach optimum temperature. get manual here
