Wednesday, July 25, 2012
Euro-Pro Dressmaker 998B Sewing Machine User’s Manual
Make sure that the power switch is in the ‘OFF’ position. Insert the batteries with the polarities in the correct position as indicated on the machine or connect the AC/DC adapter plug into the AC/DC receptacle on the right side of the machine. Connect the foot control into the foot control receptacle.
Raise the needle to its highest position.Hold the needle and loosen the needle clamp screw. Then remove the old needle.Insert the new needle into the clamp with the flat side facing away from you, toward the rear of the machine. The eye of the needle should be facing the front of the machine. Push the needle up into the needle clamp as far as it will go.Tighten the needle clamp screw. get manual here
