Monday, December 26, 2011
Chrysler 3.3/3.8 L V6 minivan air intake installation guide
This is our; Start the bone stock engine Bay. The first step is to disconnect the negative battery cable. This prevents any potential electrical problems will help you and will also "reset" is a new PCM computer "" in place of the engine intake. To disconnect the battery cable to the socket or wrench, 10mm. (Note that you want to write down just in case the first so you can clear this radio station presets.) A temperature sensor on the back of the flexible coupling. This need to slide the lock again to red and then squeeze the lever behind the black and unplug the connector.
Next, remove the PCV tube, air box lid and combines the flexible air filter before removing it, loosen the two hose clamps. Air box to remove the lid and simply release two clips one after the other in terms of the airbox. At that point (photo left), and the maximum you can tilt the lid of the airbox to remove it from the tab stop at the base of the airbox can slide in some aspects. Air filter, and then just to the right of the base of the lifts.
