Wednesday, December 7, 2011
Trouble Codes Reader Instructions for Dodge and Chrysler
Connecting the Superchips MAX MicroTuner to Your Vehicle with the Ignition Switch in the OFF Pos, locate the diagnostic connector under the dash near the steering wheel and connect the MAX MicroTuner cable to the diagnostic connector. (See Figure 1). Insure the Ignition Switch is OFF, then press the ‘>’ key on the keypad.
The MAX MicroTuner alternately displays the following messages: Turn Ignition ON Do NOT START Eng Press ‘>’ to Continue… Turn the Ignition Switch to the ON Pos. Press ‘>’ on the keypad. The MAX MicroTuner will beep and display the message. Dodge/Chrysler Diagnostic Trouble Code Interpretations. Codes shown below are for Dodge & Chrysler vehicles only.
