Thursday, December 1, 2011
Subaru Baja Snuglid SL Tonneau Cover Installation
Installing the tonneau cover
1. Remove the (six) top screws that hold the plastic bed liner. There are three on each side.
2. Install the driver side and passenger side frames. See figure 5. Note: At this time you should only install the rear and center 6 mm x 45mm screws. The front screws will be installed later along with a small bracket.
3. Install the front half of the tonneau cover. Carefully slide the front half of the tonneau cover thru the opening between the roll bars and the back of the cab. See figures 6, 7 and 8. Note: Apply masking tape as shown in Figure 6 to protect the painted surface of the vehicle during installation.
